Investing In Better Construction

About Me

Investing In Better Construction

When I started working on renovating my home, I knew that I needed to do something in order to make sure things were done according to code. Even though I had previously committed myself to doing all of the work on my own, I knew that it wasn't in my home's best interest to try my hand at things I wasn't familiar with. I began searching for professional contractors, and I was able to find an expert that really understood the intricacies of well-done construction. He worked hard to make my home beautiful, safe, and valuable. This blog is here to help people to invest in better construction.


Latest Posts

Kid-Friendly Bathroom Renovations: Choosing New Bathroom Fixtures
20 January 2021

If you have recently purchased a house with multip

2 Advantages Of Using Spray Foam Insulation In Your Home
23 November 2020

Whether you are building a new room onto your hous

Choosing A Lot To Build Your Dream Home
29 September 2020

When choosing a lot to build your dream home, you'

Everything You Need To Know About Concrete Surface Prep
10 August 2020

It is frequently said that a good paint job is 90

Myths That Can Impede Your Construction Project
23 June 2020

For most people, investing in a construction proje

New Electric Weed Eater Loses Power? It Might Be Your Electrical Outlets

If your new, corded electric weed-eater or trimmer repeatedly loses power when you use it, but the trimmer works fine when your neighbor uses it, you may wonder why your equipment doesn't work for you. Although some trimmers and extension cords can go bad, that is not always the problem. Sometimes, power tools can experience issues when they don't receive enough electricity from a home's electrical outlets. If your electrical outlets have issues, such as low voltage or poor electrical currents, they may not be enough to keep your weed-eater properly powered. Here's what you should know about your weed-eater and home's electricity and what you can do to solve the issue at hand.

What Are Possible Causes for Your Trimmer's Lack of Power?

The motors of corded weed-eaters usually range anywhere from 2 to 8 amps, depending on the motor's size and capabilities. The smaller the amp, the less power the weed-eater needs to operate. Your extension cord should be strong enough to support the tool's amperage and the amount of property you plan to trim. For example, if your weed eater is 3 amps, and you plan to trim up to 50 feet of property, you need to use a 50-foot, 16-gauge extension cord. If you want to clear away 100 feet of weeds, you need to use a 100-foot, 16-gauge cord. If you're using the right length and amperage for your trimmer during all stages of your yard work, check your home's electrical outlets.

The extension cord should convey power directly to the trimmer through your home's electrical system through your outlets. Most power tools and extension cords work well when plugged into 120-volt electrical outlets. If your outlets aren't strong or reliable enough to supply the extension cord with power, this might create a number of issues, including a loss of power to the weed-eater. 

You'll need to do a little detective work to find the real cause of your trimmer's lack of power.

What Can You Do to Power Up Your Home's Electricity?

The first thing you can do is perform a preliminary check of your electrical outlets to see if they meet the 120-volt requirements for your home and usage. There should be some type of print on the outside of the outlets that tell you the voltage they use. If the outlets don't list their voltages, contact an electrician to check for you. Removing the outlets and working with live wiring may not be safe.

If the outlets do use 120 volts, you need to dig further to find the problem. To do so, use another extension cord to power up your weed eater instead of your current cord. You want to rule out the old extension cord as the culprit behind your tool's lack of power. It's a good idea that you use multiple outlet receptors to do this step. If the extension cord powers up the weed eater, the problem may lie with the old cord. If none of the power outlets convey enough power to the new cord, the problem lies within your home's electrical outlets.

It's a good idea that you have an electrician measure your outlets with a voltage meter. If the meter reveals a low voltage or lack of electrical current passing through the outlets, replace them immediately to solve your issue. While it's okay to perform the voltage check yourself, it's safer and more efficient to have a professional do it for you.

An electrician can also examine your electrical wiring to see if the low voltage damaged them in any way. For example, the insufficient power traveling through the extension cord might have accidentally created power fluctuations in the system that burnt out some of the wiring. An electrician will let you know if this issue occurred and make suggestions on how to solve the problem.

For more assistance with your electrical problem, contact a professional, such as through sites like, today.